Description
Specifications
PPPoE
Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected
PPTP
Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks
802.11i & 802.1x WPA, WPA2 & IEEE802.1x Authenticator
Firmware Upgrade
Upgrading firmware via web browser, setting are reserved after upgrade
Reset & Backup
Reset to factory default. User can export all setting into a file via WEB
MAC Filter
Provide MAC address Filter function
Ping & Trace Route
Built-in PING function & Trace Route function in Web GUI
MIB
MIB I, MIB II(RFC1213), Private MIB
SNMP
V1, V2c,
Hardware Specifications
MCU
Atheros AR7242
RF
Atheros AR9283
Memory
64MB
Flash
16MB
Physical Interface
1 x Gigabit Ethernet Port with PoE support
1 x Gigabit Ethernet Port
2 x External N-type connector
(Both Ethernet Ports support Surge Protection to 6KV)
Power Requirements
Active Ethernet (Power over Ethernet)
802.3at support
Power Adapter 48V / 0.375A
Wireless Specifications
Frequency Band
802.11b/g/n
Data Rate
300Mbps
Operation Mode
Access Point / Client Bridge / Client Router / WDS
Wireless/Network
Auto Channel Selection (Setting varies by Regular Domains)
Distance Control (802.1x Ack timeout)
Multiple SSID (4 SSID)
VLAN Function
WDS AP / WDS Bridge / WDS Station
BSSID
Physical & Environment
Temperature Range Operating -20°C~70°C
Storage -30°C to 80°C
Humidity (non-condensing) 0%~90% typical
Waterproof IP67
Dimensions 323mm (L) x 230mm (W) x 107mm (H)
Weight: 1468g