Specifications

PPPoE  

Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected

PPTP     

Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks

802.11i & 802.1x WPA, WPA2 & IEEE802.1x Authenticator

Firmware Upgrade         

Upgrading firmware via web browser, setting are reserved after upgrade

Reset & Backup

Reset to factory default. User can export all setting into a file via WEB

MAC Filter         

Provide MAC address Filter function

Ping & Trace Route        

Built-in PING function & Trace Route function in Web GUI

MIB       

MIB I, MIB II(RFC1213), Private MIB

SNMP  

V1, V2c,

Hardware Specifications

MCU     

Atheros AR7242

RF          

Atheros AR9283

Memory             

64MB

Flash    

16MB

Physical Interface           

1 x Gigabit Ethernet Port with PoE support

1 x Gigabit Ethernet Port

Power Requirements   

Active Ethernet (Power over Ethernet)

802.3af/at support

Power Adapter: 48V DC / 0.38A

Wireless Specifications

Frequency Band              

802.11b/g/n

Data Rate           

300Mbps

Operation Mode             

Access Point / Client Bridge / Client Router / WDS

Wireless/Network         

Auto Channel Selection (Setting varies by Regular Domains)

Distance Control (802.1x Ack timeout)

Multiple SSID (4 SSID)

VLAN Function

WDS AP / WDS Bridge / WDS Station

BSSID

Physical & Environment

Temperature Range        Operating -20°C~70°C

Storage -30°C to 80°C

Humidity (non-condensing)         0%～90% typical

Waterproof        IP67

Dimensions        323mm (L) x 230mm (W) x 107mm (H)

Weight: 1568g